Hi Team,
Taking this further, we did put the requisite base values. The scenarios that we have worked on are:
Scenario 1:
Total: 100
Written: 60
Sessional: 40
- Passing marks out of 100= 40
- Passing marks out of 60=20
- Passing marks out of 40=10
So accordingly we have put the base value using the excel sheet by SAP and have maintained base value as follows: (system base value = 70000)
Scale 100 Base Value= 40000
Scale 60 Base Value= 55000
Scale 40 Base Value= 60000
Output:
- Calculation of marks is not happening properly
- Pass/ Fail indicator of Written and Sessional is shown properly.
Scenario 2: (marks same as above)
Here we are not putting the base values
Output:
- Calculation of marks is proper
- Pass/Fail is not happening properly
We are now stuck with this problem.So as standard will this work or we need to apply any rules to get the required result??
In scenarios where we needed conversion from Quantity to Quality scale is working fine as you had explained in the earlier message.
Regards
Nivedita and Ramesh.